When you connect a WD external drive to your Mac computer, and you have the WD Drive Manager installed on it, a little blue WD icon appears in the upper right corner of your desktop. Depending on the status of your drive, or dual RAID drive, the WD icon will do different things.
- The WD icon is also the way that you access the drive’s status, or as in this case, the drive’s RAID status. When the RAID is healthy, you will see the blue WD icon. Clicking on the WD icon opens a short menu that leads to launching the RAID Manager. From there, you…
Please Note: WD Drive Manager will appear in the System Tray only when your WD My Book external hard drive is attached to your computer. The software can be downloaded from the Downloads Library.
Examples of what it does on single WD My Book drives:
- When you mouse over the WD icon, the WD Drive Manager will show you the drive status: Drive Name, Volume Letter, Percent Used, Temperature Status. If the drive is healthy, the icon is steady and dark blue.
- When you right-click on the Drive Manager icon, it will allow you to safely remove the drive.
- Left-click on the…
Note: A RAID 0 array is not fault tolerant. It is recommended that you backup any important data that you decide to store on the array.
To create a RAID 0 array please follow the steps below:
- With the computer powered off, follow the instructions for installing the RAID controller correctly and connect both Serial ATA hard drives to the controller.
- Boot your computer with the controller and drives already installed.
- Watch your boot screens for a prompt that will ask you to press the Control and F keys at the same time to enter the Fastbuild utility and press those keys to enter.
- Press the 1 key to enter…
RAID – Wikipedia, the free encyclopedia
For instance, a 2-disk RAID 1 array loses half of the total capacity that …. For example, RAID 10 (or RAID 1+0) consists of several level 1 arrays of …
en.wikipedia.org/wiki/RAID
Standard RAID levels – Wikipedia, the free encyclopedia
A classic RAID 1 mirrored pair contains two disks (see diagram), which increases … Some older RAID 1 implementations would also read both disks …
en.wikipedia.org/wiki/Standard_RAID_levels
More results from en.wikipedia.org »
RAID Level 1
Description: RAID 1 is usually implemented as mirroring; a drive has its data duplicated on two different drives using either a hardware RAID controller or …
www.pcguide.com/ref/hdd/perf/raid/…/singleLevel1-c.html
AC&NC | RAID.edu –…
RAID – Wikipedia, the free encyclopedia
RAID 0 (striped disks) distributes data across several disks in a way that gives …. When the top array is a RAID 0 (such as in RAID 10 and RAID 50) most …
en.wikipedia.org/wiki/RAID
Standard RAID levels – Wikipedia, the free encyclopedia
A RAID 0 can be created with disks of differing sizes, but the storage space added to … RAID 0 implementations with more than two disks are also possible, …
en.wikipedia.org/wiki/Standard_RAID_levels
More results from en.wikipedia.org »
RAID Level 0
Common Name(s): RAID 0. (Note that the term “RAID 0″ is sometimes used to mean not only the conventional striping technique described…
RAID Data Recovery Software. Recover Data from RAID Servers – Unistal
– Jun 11
Unistal Systems offers RAID Data Recovery from both RAID-0 & RAID-5 of … Download Demo version of Quick Recovery for RAID-5 to recover data from lost, …
www.unistal.com/raid-data-recovery.html
Data Recovery Software – Hard Drive Recovery – RAID Data Recovery
– 3 visits – Jun 9
Data Recovery from RAID 0 and RAID 5. The new version has an improved analysis engine, helping you to identify the unkown RAID structure. …
www.runtime.org/
RAID Reconstructor – Recover Data from a Broken RAID Array
Recover Data from a broken RAID Level…
